Table of Contents
Advertisement
A
E
Lift the vertical support pole (A) and rest it in correspondence with the relative holes on the
assembled base (B) or on the ground, and simultaneously pull the heaving line (E) until the power
cable comes out of the base (B). Fasten the pole using the relative screws provided.
NOTE: If assembling on a base, the knob (D) must always be turned away from the side
where the power cable comes out (E).
Rev.1 - 03.2018
2
D
B
If Sail is fastened directly to the ground, mark out the holes using the plate of the pole
(A) as a template, drill into the ground using a suitable bit and fasten the pole using
suitable anchors.
SCREEN INNOVATIONS - INSTALLATION MANUAL - SAIL
ASSEMBLING THE POLE
A
9 of 28
Advertisement
Table of Contents
