Reader Buzzer Not Working As Expected - HID ACW2-XN Technical Service Manual

Reader Buzzer not working as expected

Key Indicators
• When a tag is presented at the reader, the reader buzzer should beep.
(LED turns green, an event is logged on HID Access Manager– but there is no "BEEP")
Analysis
• Has the reader been wired correctly?
o
Wire all relevant reader connections, including buzzer control, correctly.
• Is the Reader defective?
o Replace reader.
• Is the Wiegand Door Module defective?
o Replace Wiegand Door Module.
• Is the Wiegand cable to the reader, defective?
o
Replace Wiegand cable to reader (wiring is correct – but is cable defective)
© 2017 HID Global Corporation. All rights reserved.
Web-Based Access Control Solution
Technical Service Guide
ACW2-XN
Page 13 of 27