Reader Not Powering Up - HID ACW2-XN Technical Service Manual

Reader not powering up

Key Indicators
• Reader LEDS's should glow RED or GREEN when the reader is powered up.
Analysis
• Is the reader wired correctly?
o Wire the reader correctly.
• Has the maximum cable distance to the reader been exceeded?
o
Ensure cable distance does not exceed maximum length.
•
Is the Reader defective?
o Replace reader.
• Is the Wiegand Door Module defective?
o
Replace Wiegand Door Module.
• Is the Wiegand cable to the reader, defective?
o
Replace Wiegand cable to reader (wiring is correct – but is cable defective)
© 2017 HID Global Corporation. All rights reserved.
Web-Based Access Control Solution
Technical Service Guide
ACW2-XN
Page 11 of 27