Table of Contents
Advertisement
Web-Based Access Control Solution
ACW2-XN
4
Hardware Capabilities
Feature
Max People
Max Cards
Max Logs
# of Doors
Note:
•
Additional ACW2-XN and/or AW2 modules are required.
5
Power Supply (A-X1)
AC Mains Input
100-230 VAC (50/60Hz), 1.3A
Battery Charging Circuit
Conditions
Supply at 12V DC, battery flat, max charge current
Optional Battery (Strongly recommended)
Not included with the ACW2-XN, this battery must be sourced separately.
Note:
•
Only connect the battery after all system wiring is complete and tested on the built-in power
supply
Battery
Type
Voltage
Capacity
Physical Dimensions
Battery Protection Fuse
Length
Type
Rating
Page 20 of 27
System Specifications
Specification
1000
3 Cards per Person
100 000 events
2 Doors or 1 APB Door
(*Expandable to 8 doors, or 8 APB Doors)
Electrical Specifications
Specification
Lead Gel
12V
7 Ah
65 mm x 101 mm x 151 mm – or smaller
Specification
20 mm
Slow-blow
6.3 A
Technical Service Guide
DC Output
12V, 5A
Current
Power
500 mA
6 W
© 2017 HID Global Corporation. All rights reserved.
Advertisement
Table of Contents
