Controller Module (AC)
Power
Conditions
Supply at 12V DC
Inter-Module Communications
Connector
10-way connectors:
female on the left, male on the right
Network
Connector
RJ45
RS-485 Device Port (for linking a master AC to a slave AC)
Interface
Baud Rate
RS-485
38 400
Wiegand Module (AW2)
Power (At 12V DC)
Conditions
Relays idle, No readers Connected
Both relays activated, maximum reader load
Relays
Contact Rating
[10A, 28VDC]
[5A, 220VAC]
[12A, 120VAC]
Inter-Module Communications
Connector
10-way connectors:
Female on the left, male on the right
Wiegand Reader Port
Connector
10-way Screw Terminal Plugs
© 2017 HID Global Corporation. All rights reserved.
Protocol
Ethernet, 10/100 Base T, half or full duplex
Data Format
8 data bits, no parity, 1 stop bit
Configuration
Double Pole Single Throw
Purpose
Power and data lines to other modules
Reader Connections
12V, 5V, 0V, D0, D1, LED(Red), LED(Green), Buzzer, Hold, Shield
Web-Based Access Control Solution
Current
140 mA
Purpose
Power and data lines to other modules
Current
37 mA
503 mA
Contacts
Operations
> 100 000 (with MOVs installed
NO, NC, COM
across 12V inductive loads)
Technical Service Guide
Power
1.7 W
Power
0.44 W
6 W
Page 21 of 27
ACW2-XN