Battery backup not working:
Key Indicators
•
Controller should remain powered up when mains power is removed.
•
The STAT and SPD LEDs should both be ON
(Picture shows the STAT and SPD LEDs illuminated)
Analysis
•
Is the connection to the battery defective?
o
Fix defective battery connection (polarity reversed or loose connection)
•
Is the battery fuse defective?
o
Replace battery fuse.
•
Is battery defective?
o
Replace battery
© 2017 HID Global Corporation. All rights reserved.
Web-Based Access Control Solution
Technical Service Guide
ACW2-XN
Page 7 of 27