6.5.15. Current day (CD)
Set the current day.
Note
The day of week parameter is only available if day of the week mode has been set in
regeneration control type selection.
Note
The current day is defined from D1 (Monday) to D7 (Sunday).
AP Press
or
AQ Press
to validate the selection and move to the next parameter.
6.5.16. Flow meter type (FM)
Note
The flow meter type parameter is only available if the regeneration control type has been
programmed for volumetric regeneration.
Select the flow meter type.
Options:
•
P0.7: ¾" paddle wheel meter;
•
t0.7: ¾" turbine meter;
•
P1.0: 1" paddle wheel meter;
•
t1.0: 1" turbine meter;
•
t1.2: 1¼" turbine meter;
•
P1.5: 1½" paddle wheel meter;
•
t1.5: 1½" turbine meter;
•
P2.0: 2" paddle wheel meter;
•
Gen: generic or other non-Fleck meter.
AR Press
or
AS Press
to validate the selection and move to the next parameter.
Ref. MKT-IM-016 / C - 08.06.2018
to set the current day.
to select the flow meter type.
Installer Manual Fleck 5810 - SXT - Programming
67 / 106