Installer Manual Fleck 9100 - SXT - Programming
6.4.2. Regeneration time (RT)
Determine the time of regeneration.
D
Adjust the regeneration time with
E
Press
to validate the selection and advance to the next parameter.
6.4.3. Feed Water Hardness (H)
Determine the feed water hardness in °tH.
F
Adjust the water hardness with
G
Press
to validate the selection and advance to the next parameter.
6.4.4. Fixed reserve capacity (RC)
Determine the reserve capacity in Liter.
H
Adjust the reserve capacity with
I
Press
to validate the selection and advance to the next parameter.
6.4.5. Current day of the week (CD)
Determine the day of regeneration.
Note
Appears only if the softener is set to "weekly time clock".
Note
1 for Monday, 2 for Tuesday, 3 for Wednesday, 4 for Thursday, 5 for Friday, 6 for Saturday
and 7 for Sunday.
J
Adjust the day of the week with
K
Press
to validate the selection and exit the basic programming mode.
6.5.
Master programming mode
A
Press and hold
the service icon and the parameter display reads TD.
B
Set the time to 12:01 PM with
C
Press
to validate the selection and return to the service mode, or wait for 10 seconds.
D
Press and hold
the service icon and the display format screen appears.
44 / 94
and
and
and
and
or
until the programming icon replaces
or
.
and
until the programming icon replaces
.
.
.
.
Ref. MKT-IM-004 / A - 27.10.2016