Hazards; Personnel; Material; Hygiene And Sanitization - Pentair FLECK 5810 SXT Installer Manual

Installer Manual Fleck 5810 - SXT - Safety
2.3.

Hazards

All the safety and protection instructions contained in this document must be observed in order to
avoid temporary or permanent injury, damage to property or environmental pollution.
At the same time, any other legal regulations, accident prevention and environmental protection
measures, as well as any recognized technical regulations relating to appropriate and risk-free
methods of working which apply in the country and place of use of the device must be adhered to.
Any non-observation of the safety and protection rules, as well as any existing legal and technical
regulations, will result in a risk of temporary or permanent injury, damage to property or
environmental pollution.

2.3.1. Personnel

Only qualified and professional personnel, based on their training, experience and instruction as well
as their knowledge of the regulations, the safety rules and operations performed, are authorized to
carry out necessary work.

2.3.2. Material

The following points must be observed to ensure proper operation of the system and the safety of
user:
• be careful of high voltages present on the transformer (100 - 240 V);
• do not put your fingers in the system (risk of injuries with moving parts and shock due to electric
voltage).
2.4.

Hygiene and sanitization

2.4.1. Sanitary issues

Preliminary checks and storage
• Check the integrity of the packaging. Check that there is no damage and no signs of contact with
liquid to make sure that no external contamination occurred;
• the packaging has a protective function and must be removed just before installation. For
transportation and storage appropriate measures should be adopted to prevent the
contamination of materials or objects themselves.
12 / 106 Ref. MKT-IM-016 / C - 08.06.2018