6.5.7. Unit capacity (C)
Set the unit capacity.
Note
The unit capacity parameter is only available if the regeneration control type has been
programmed for volumetric regeneration.
Note
The unit capacity can be set from 1 to 999,9 x 1000 °TH*L, g as CaCO
M Press
or
N
Press
to validate the selection and move to the next parameter.
6.5.8. Filter capacity (V)
Set the filter capacity.
Note
The filter capacity parameter is only available if the regeneration flow has been
programmed for filter.
Note
The filter capacity can be set from 1 to 999.9 x 1000 L.
O
Press
or
P
Press
to validate the selection and to move the next parameter.
Ref. MKT-IM-016 / C - 08.06.2018
to set the unit capacity.
to set the filter capacity.
Installer Manual Fleck 5810 - SXT - Programming
equivalent.
3
61 / 106