Menu 7.1 - Scale Specific Settings (Jump List 71) - Digistar SCALE LINK SL2 Technical Manual

MENU 7.1 – SCALE SPECIFIC SETTINGS (JUMP LIST 71)
SCALE PLATFORM A
SCALID (D.A.N. 7101) SCALE ID SETUP
Identity of scale location (Truck ID or Mixer Number).
W MTHD (D.A.N. 7103) WEIGH METHOD
Select weigh method 1-General, 2-Slow, 3-Fast, or 4-Lock - On (Stockweigh only)
LB-KG (D.A.N. 7104) DISPLAY UNIT
Display pounds - lb or kilograms – kg
COUNT (D.A.N. 7105) DISPLAY COUNT
Select display count size of weigh values.
CAP (D.A.N. 7106) CAPCITY
Enter MAXIMUM weight measurable on scale.
WMA1-1 (D.A.N. 7107) WM1 ADJUST 1
Increase this number to smoothen weighing (2 to 100)
WMA1-2 (D.A.N. 7108) WM1 ADJUST 2
0=OFF. Use value less than WMA1-1 for quick weight response.
WMA1-3 (D.A.N. 7109) WM1 ADJUST 3
Enter the weight to activate quick weight response.
WMA2-1 (D.A.N. 7111) WM2 ADJUST 1
Increase this number to smoothen weighing.
WMA2-2 (D.A.N. 7112) WM2 ADJUST 2
0=OFF. Use value less than WMA2-1 for quick weight response.
WMA2-3 (D.A.N. 7113) WM2 ADJUST 3
Enter the weight to activate quick weight response.
MOTION (D.A.N. 7114) MOTION
ON = motion arrow flashes for unstable weight.
MOT WT (D.A.N. 7115) MOTION WEIGHT
Enter weight used to detect Motion. 0=Standard Motion detection.
TAREAP (D.A.N. 7116) TARE AUTO PRINT
ON = tare will auto-print displayed weight.
50 Scale Link 2 Technical Manual D4204-EN