Table of Contents
Advertisement
6
Maintenance
6.1
Service agreements
Description
Since all service and maintenance has to be done by properly certified and trained service personnel,
it is strongly advised to check for a service agreement. BeaconMedæs Customer Centres have a range
of service agreements to suit your needs:
• An Inspection Plan
• A Preventive Maintenance Plan
• A Total Responsibility Plan
Contact your Customer Centre to set up a tailor-made service agreement. It will ensure optimum operational
efficiency, minimize downtime and reduce the total life cycle costs.
6.2
Maintenance instructions
General
The CD dryer and the QDT/QDT+ filter do not need any specific maintenance except for the desiccant,
respectively activated carbon (for QDT) and catalyst replacement (for QDT+).
However, the scheduled performance and service life may decrease if liquid water or particles enter
the unit. Therefore, correct maintenance of the water separator and the filters is crucial.
Safety precautions
Before carrying out any maintenance or corrective activity, apply the following recommendations and
safety precautions:
• Stop the unit and switch off the power.
• Disconnect all pressure sources and vent the internal pressure of the system before dismantling any
pressurized component.
• Use genuine spare parts only. Consult the Spare Parts List for part numbers. For preventive maintenance,
dedicated Service kits are available.
• Check for correct operation after maintenance.
Warranty-Product Liability
Use only authorised parts. Any damage or malfunction caused by the use of unauthorised parts is not covered
by Warranty or Product Liability.
Any damage or malfunction caused by bad maintenance is not covered by Warranty or Product Liability.
68
Maintenance must be done by trained and certified service personnel.
Use only authorised genuine parts.
Check the correct operation after maintenance.
Instruction book
2920 7099 70
Hide quick links:
Advertisement
Table of Contents
