Table of Contents
Advertisement
3.3
Controller alarms and faults
3.3.1
Controller alarms and faults
When no alarm is active, the normal status is shown and transmitted to the hospital control room.
(1)
Normal
(2)
Line pressure
(3)
Atmospheric dew point
When an alarm is transmitted to the hospital control room and shown on the central controller (accompanied
by the red warning LED on the central controller and - when applicable - also on a compressor controller), a
problem needs to be remedied. 4 alarms can occur, alone or simultaneously.
Per alarm, the possible originating faults are described along with their remedies. When trying to remedy
problems, always take into account the maintenance warnings (see
(1)
Plant fault
(2)
Plant emergency
(3)
Reserve fault
(4)
Pressure fault
(5)
Line pressure
44
(4)
Menu
(5)
Detail
(6)
Views
Maintenance
(6)
Atmospheric dew point
(7)
Menu
(8)
Detail
(9)
Views
Instruction book
warnings).
2920 7099 70
Hide quick links:
Advertisement
Table of Contents
