BeaconMedaes dMED 7 Instruction Book page 29

Instruction book
Automatic restart
In the Settings submenu, the ArAF (Automatic Restart After voltage Failure) submenu is accessible (full
access needed, see above). Ex factory, it should be set to Infinite.
Contact BeaconMedæs if it is believed these settings should be changed.
Other settings
The following settings can be found under the ES Master submenu.
In normal circumstances these settings should not be changed, please contact BeaconMedæs.
Parameter
Pressure band X
High
Pressure band X
Low
Pressure band in
use
Scheme in use
2920 7099 70
Function
To program the maximum setting for
pressure band X
To program the minimum setting for
pressure band X
To select between pressure band 1 and
2
To define which scheme is in use (see
slave parameter scheme X priority)
Min. Factory
setting setting
4 10
4 9
- 1
- 1
Max. Unit
setting
15 bar
15 bar
- -
- -
27