Function Lock - Honeywell DC1000 Series Product Manual

Configuration

4.4 Function Lock

According to the status of the parameter "LCK" in 'Configuration 1' mode, 'access to
modes' and 'change of values' can be prohibited.
LCK=0000
LCK=0100
LCK=0110
LCK=0001
LCK=1111
LCK=0101
Configuration should be performed only by personnel who are technically
competent to do so. Local Regulations regarding electrical & safety must be
observed.
34
MODE ACCESS-Access to 'Operation', Configuration1 & 2'
modes allowed (* Default)
MODE ACCESS-Access to 'Operation' & 'Configuration 1'
mode allowed
VALUE CHANGE-Every value change in each mode allowed
MODE ACCESS-Access to 'Operation' & 'Configuration 1'
mode allowed
VALUE CHANGE -Value changes only in 'Operation' mode
allowed
MODE ACCESS-Access to 'Operation' mode allowed
VALUE CHANGE-Value change of SP (Set Point) allowed
only
MODE ACCESS-Access to "Set Up" mode allowed
All access & value changes prohibited except the change of
"LCK" status
CAUTION
DC1010/1020/1030/1040 Product Manual 8/05