Honeywell D6 PRO Quick Manual

D6 PRO Wi-Fi DUCTLESS CONTROLLER
Quick Guide

Display sleep

The controller goes into Display sleep (the screen is dim) after 45 seconds of
o
inactivity. Press to wake up the controller. This button push does not change
temperature or settings.

Room temperature

Any time the controller is not being interacted with, the current room temperature
is displayed on screen.

Viewing set temperature

+ -
Be sure the controller is not in Display sleep, then press or once to view the
current set temperature. The set temperature will "pulse" on screen. After a short
period of time the screen will change to display the room temperature.

Change temperature

+ -
1. Be sure the controller is not in Display sleep, then press or more than once
to change the set temperature so it is higher or lower in the current mode.
+ -
2. Stop pressing or when you reach the temperature you want.
3. The screen will pulse and then return to the room temperature display.
Warmer Cooler