Set And Operate Frequency Command - YASKAWA Varispeed-616GII Instruction Manual

5. 2 .1 Set and Operate Frequency Command
DRIVE
Set frequency command in drive mode (
PRc
Setting
DsP~
"
(1)
Depress
1n
while depressing
then the frequency
command appears .
When this is repeated, the display changes
as follows .
See (3) for details .
F~OUENC Y COMMAND OUTPUT FREQUENCY }---~ OUTPUT CURRENT
F--~
CONTENT OF BAST FALURE
u u u. u
FREQUENCY COMMAND IN THE LAST TIME ,
(2)
Using
RESET
flash can be moved to the digit to be set, and the
numeric set with
[7o
key .
(3) Depress
DSP
NTR
to store the frequency command value .
(Stored data is maintained when the power is off .)
DSP~L
(4)
Depress
17o
while depressing
~NTR
to select the output
frequency to be indicated .
Operation
FWD/REV
(5)
Depress
MODE
to select the motor rotating direction .
RUN
(6)
Depress
DATA
to give run command . The motor accelerates
acoording to the specified acceleration time (10 s) and holds the
speed at the specified frequency .
Stop operation
STOP
(7)
Depress SET
to stop the motor. The motor decelerates according
to the specified deceleration time (10 s) .