Icom IC-9700 Reference Manual page 12

Remote control
D Command table (Continued)
Cmd. Sub cmd. Data
1A* 05 0316 See p. 17 GPS > GPS TX Mode > NMEA >
GPS Message (Up to 20 characters)
0317 See p. 17 GPS > GPS Alarm> Alarm Area (Group)
0318 00 to 03 GPS > GPS Alarm> Alarm Area (RX/Memory)
(00=Limited, 01=Extended, 02=Both)
0319 00 to 08 GPS > GPS Auto TX
00=OFF, 01**=5 sec., 02=10 sec., 03=30
sec., 04=1 min., 05=3 min., 06=5 min., 07=10
min., 08=30 min.)
** When 4 kinds of GPS sentences are
0320 00 to 03 DTMF SET > DTMF Speed
( 00=100ms, 01=200ms, 02=300ms,
0321 0000 to 0255 Set the NB LEVEL (144 MHz)
(0000=0% to 0255=100%)
0322 00 to 09 Set the NB DEPTH (144 MHz)
(00=1 to 09=10)
0323 0000 to 0255 Set the NB WIDTH (144 MHz)
(0000=1 to 0255=100)
0324 0000 to 0255 Set the NB LEVEL (430 MHz)
(0000=0% to 0255=100%)
0325 00 to 09 Set the NB DEPTH (430 MHz)
(00=1 to 09=10)
0326 0000 to 0255 Set the NB WIDTH (430 MHz)
(0000=1 to 0255=100)
0327 0000 to 0255 Set the NB LEVEL (1200 MHz)
(0000=0% to 0255=100%)
0328 00 to 09 Set the NB DEPTH (1200 MHz)
(00=1 to 09=10)
0329 0000 to 0255 Set the NB WIDTH (1200 MHz)
(0000=1 to 0255=100)
0330 00 to 20 Set the VOX DELAY
(00=0.0 sec. to 20=2.0 sec.; 0.1 sec steps)
0331 00 to 03 Set the VOX voice delay
(00=OFF, 01=Short, 02=Mid, 03=Long)
0332 00 or 01 Set the TX PWR LIMIT (144M) function
(00=OFF, 01=ON)
0333 0000 to 0255 Set the TX PWR LIMIT (144M)
(0000=1 to 0255=100)
0334 00 or 01 Set the TX PWR LIMIT (430M) function
(00=OFF, 01=ON)
0335 0000 to 0255 Set the TX PWR LIMIT (430M)
(0000=1 to 0255=100)
0336 00 or 01 Set the TX PWR LIMIT (1200M) function
(00=OFF, 01=ON)
0337 0000 to 0255 Set the TX PWR LIMIT (1200M)
(0000=1 to 0255=100)
0338 00 or 01 Set the Received Call sign Display ("Name"
or "Call Sign")
(00=Call Sign, 01=Name)
0339 00 to 02 Set the Compass Direction
( 00=Heading Up, 01=North Up,
06 See p. 17 DATA mode with filter set
07 See p. 18 Set the Satellite memory contents
08 00 or 01 NTP server access
(00=Terminate, 01=Initiate)
09* 00 to 02 Read NTP server access result
1
(00= Accessing, or have not accessed
0A* 00 or 01 Read the OVF indicator status
1
(00=OFF, 01=ON)
1B* 00 See p. 19 Send/read the Repeater tone frequency
01 See p. 19 Send/read the TSQL tone frequency
02 See p. 19 Send/read the DTCS code and polarity
07 See p. 19 Send/read the CSQL code (DV mode)
1C 00* 00 or 01
Send/read the transceiver
(00=RX, 01=TX)
02* 00 or 01 Send/read the Transmit frequency monitor
(XFC)
(00=OFF, 01=ON)
03* See p. 13 Read the transmit frequency
1
Description
selected, you cannot select "01."
03=500 ms)
02=South Up)
after Power ON,
01=Succeeded, 02=Failed)
'
s status
Cmd. Sub cmd. Data
1E 00*
1
01* See p. 13
1
02*
1
03* See p. 13
1F* 00 See p. 19
01 See p. 19
02 See p. 19
20 00 00* 00 or 01*
01 See p. 20
See p. 20
02 1
*
01 00* 00 or 01*
01 See p. 20
See p. 20
1
02 *
02 00* 00 or 01*
01 See p. 20
See p. 20
1
02 *
03 00* 00 or 01*
0100 See p. 21
0101 See p. 21
0102 See p. 21
0103 See p. 21
0200 * 1 See p. 21
* 1
0201 See p. 21
0202 * 1 See p. 21
* 1
0203 See p. 21
04 00* 00 or 01*
01 See p. 22
See p. 22
1
02 *
21* 00 See p. 23
01 00 or 01
22 00 See p. 23
01 00* 00 or 01
01 See p. 23
02* 00 or 01
03* 00 or 01
04* 00 or 01
05* 00 to 10
23 See p. 23
1
00 *
01* 00, 02, 03
02* See p. 17
24 00 00* 00 or 01
01 00 or 01
25* See p. 23
26* See p. 23
11
Description
Read number of available TX frequency band
Read TX band edge frequencies
Read number of user-set TX frequency band
Set the user-set TX band edge frequencies
SET > My Station > My Call Sign (DV)
SET > Display > TX Call Sign Display
SET > My Station > TX Message (DV)
Send/read the Auto DV RX Call signs output
7
(00=OFF, 01=ON)
Output DV RX Call signs for transceive
Read Auto DV RX Call signs
Send/read the Auto DV RX message output
7
(00=OFF, 01=ON)
Output DV RX message for transceive
Read Auto DV RX message
Send/read the Auto DV RX status output
7
(00=OFF, 01=ON)
Output DV RX status for transceive
Read Auto DV RX status
Send/read the Auto DV RX GPS/D-PRS data
7
output
(00=OFF, 01=ON)
Output DV RX GPS/D-PRS Position for
transceive
Output DV RX D-PRS Object status for
transceive
Output DV RX D-PRS Item status for
transceive
Output DV RX D-PRS Weather status for
transceive
Read Auto DV RX GPS/D-PRS Position status
Read Auto DV RX D-PRS Object status
Read Auto DV RX D-PRS Item status
Read Auto DV RX D-PRS Weather status
Send/read Auto DV RX
7
GPS/D-PRS message output
(00=OFF, 01=ON)
Output DV RX D-PRS message for transceive
Read Auto DV RX D-PRS message status
RIT frequency
RIT setting
(00=OFF, 01=ON)
Set the DV TX data (Up to 30 byte)
Set the Auto DV RX data output
Set the DV RX data for transceive
(Up to 30 byte)
SET > DV/DD Set > DV Data TX
(00=PTT, 01=Auto)
SET > DV/DD Set > DV Fast Data > Fast Data
(00=OFF, 01=ON)
SET > DV/DD Set > DV Fast Data >
GPS Data Speed
(00=Slow, 01=Fast)
SET > DV/DD Set > DV Fast Data >
TX Delay (PTT)
(00=OFF, 01=1 sec. to 10=10 sec.)
Read the position status
GPS > GPS Set > GPS Select
(00=OFF, 02=External GPS, 03=Manual)
GPS > GPS Set > Manual Position
Send/read TX output power setting
(00=OFF, 01=ON)
Set the TX output power for transceive
(00=OFF, 01=ON)
Set the selected or unselected VFO frequency
Set the selected or unselected VFO's
operating mode and filter