Table of Contents
Advertisement
1 Implementation
The boiler can be installed :
- in the kitchen,
- in the cellar,
- in the boiler house.
It is necessary to have in every case :
- 5 cm on one of the boiler sides,
- 70 cm minimum in front,
- and 5 at the rear.
Also have the required space for installing the expansion reservoir
and the heating circulator.
1.1
Ventilation
The ventilation section, obligatory in the location where the heater is
installed where there is a direct air inlet must conform with the DTU
61.1 (P45-204) standard and in particular with the instruction on
general management (Book 1764, April 1982).
In order to avoid damage to the boilers, it is necessary to
prevent the contamination of combustion air by chlorine
and/or fluoride compounds, which are particularly
corrosive.
These compounds are present, for example, in aerosol sprays,
paints, solvents, cleaning products, washing products, detergents,
glues, snow clearing salts, etc.
Therefore :
- Do not suck in air evacuated from premises using such products:
hairdressing salons, dry cleaners, industrial premises (solvents),
premises containing refrigeration systems (risk of refrigerant
leakage), etc.
- Do not stock such products close to the boilers.
If the boiler and/or peripheral equipment are corroded by such
chloride or fluoride compounds, the contractual guarantee
cannot be applied.
10
Installation
Furniture
DTG 1300 Eco.NOx/V
5 cm from the w
5 cm to the left or right
23/06/05 - 300002940-001B
Hide quick links:
Advertisement
Table of Contents
