Control Panel Assembly - DeDietrich Elitec DTG 1304 Eco.NOx/V Technical Instructions

The command panel is attached as follows :
1. Unscrew the 2 mounting screws at the back of the column head.
3. Unscrew the 2 mounting screws from the screen
5. Take the command panel out of its packaging.
6. Slide the panel along the front plate. Push the 1 tubes through the
lower opening on the panel case.
12

Control panel assembly

2. Remove the upper casing of the boiler.
4. Take out the shutter + screen assembly.
.
DTG 1300 Eco.NOx/V 23/06/05 - 300002940-001B