13. Attach the burner cable to the 12 connector studs located on the
inner face of the command panel.
14. Connect the earth cable to the clip located on the front plate.
15. Open the side of the panel.
17. Close the panel front.
19. Thread the connection label into the screen slots. Correctly place
the label using the truncated corner 7.
14
16. Attach the anti-release safety device onto the 3 connector studs
on the command panel.
Connect the panel's electrical connections according to the
panel's instructions
18. Re-assemble the shutter * screen assembly.
DTG 1300 Eco.NOx/V
23/06/05 - 300002940-001B