2 Delivery and handling
Transport
VVM 310 should be transported and stored vertically in
a dry place. However, the VVM 310 may be carefully
laid on its back when being moved into a building.
Assembly
• Position VVM 310 on a firm base that can take the
weight. Use the product's adjustable feet to obtain a
horizontal and stable set-up.
20-55 mm
30 - 50 mm
• As water can exit the safety valve* for hot water,
when connected to VVM 310, the space where
VVM 310 is located must be provided with a floor
drain.
*Not enclosed.
8
Chapter 2 | Delivery and handling
0
R
INSTALLATION AREA
Leave a free space of 800 mm in front of the product.
All service on VVM 310 can be carried out from the front.
800
NOTE
Leave 10 – 25 mm free space between the in-
door module and the wall behind for routing of
cables and pipes.
NIBE VVM 310