Nibe VVM 310 EMK Installer Manual page 42

TIP
See page 47 for a more in-depth introduction
to the installation's control system (operation,
menus etc.).
Commissioning
The first time the installation is started a start guide is
started. The start guide instructions state what needs
to carried out at the first start together with a run
through of the installation's basic settings.
The start guide ensures that start-up is carried out cor-
rectly and cannot be bypassed. The start guide can be
started later in menu 5.7.
During the start up guide the reversing valves and the
shunt valve are run backward and forwards to help vent
VVM 310.
Caution
As long as the start guide is active, no function
in VVM 310 will start automatically.
The guide will appear at each restart of
VVM 310, until it is deselected on the last page.
42 Chapter 6 | Commissioning and adjusting
Operation in the start guide
A. B.
Page Name and menu number
If the start guide is left on this page it closes
automatically in
60 min
C.
Option / setting
Page
A.
Here you can see how far you have come in the start
guide.
Scroll between the pages of the start guide as follows:
1. Turn the control knob until one of the arrows in the
top left corner (at the page number) has been
marked.
Press the OK button to skip between the pages in
2.
the start guide.
Name and menu number
B.
Read what menu in the control system this page of the
start guide is based on. The digits in brackets refer to
the menu number in the control system.
If you want to read more about affected menus either
consult the help menu or read the user manual.
Option / setting
C.
Make settings for the system here.
Help menu
D.
In many menus there is a symbol that indicates
that extra help is available.
To access the help text:
Use the control knob to select the help symbol.
1.
2. Press the OK button.
The help text often consists of several windows that
you can scroll between using the control knob.
language 4.6
NIBE VVM 310