Delivery And Handling; Transport; Assembly; Supplied Components - Nibe VVM 325 Installer Manual

2 Delivery and handling

Transport

VVM 325 should be transported and stored vertically
in a dry place. However, the VVM 325 may be carefully
laid on its back when being moved into a building.

Assembly

Position VVM 325 on a firm base that can take the
■
weight, preferably on a concrete floor or foundation.
Use the product's adjustable feet to obtain a horizont-
al and stable set-up.
30 - 50 mm
The area where VVM 325 is located must be
■
equipped with floor drainage.
Installation area
Leave a free space of 800 mm in front of the product.
All service on VVM 325 can be carried out from the
front.
800
NOTE
Leave 10-25 mm free space between the in-
door module and the wall behind for routing
of cables and pipes.
NIBE™ VVM 325

Supplied components

Outside sensor
Current sensor
Location
The kit of supplied items is placed on top of the
product.
Chapter 2 |
Room sensor
Delivery and handling 5