Delivery and handling
Mounting
SMO 20 is a separate, electric control module and must be
mounted on a wall.
Caution
The screw type must be adapted to the surface
on which installation is taking place.
Use all mounting points and mount the module upright, flat
against the wall.Leave at least 100 mm of free space around
the module to allow access and make cable routing easier
during installation and servicing.
NOTE
The installation must be carried out in such a way
that IP21 is satisfied.
NIBE SMO 20
Removing the cover
The cover of the control module is opened using a Torx 25
screwdriver. Assemble in the reverse order.
Supplied components
Outdoor temperature sensor
(BT1)
Aluminium tape
Temperature sensor
Chapter 2 | Delivery and handling
3
2
1
Insulation tape
Cable ties
Heating pipe paste
9