Table of Contents
Advertisement
6. Troubleshooting
Problem:
«Communication
Solution: check the integrity of communication cables from moisture sensors to the
control panel and reliability of connecting leads.
Problem:
«Error
7» message on the screen (fig. 33).
Solution: repeat selection of product in
Problem: one or both sensors show moisture values other than 0.0% and readiness
indicators are white
Solution: perform calibration according to section 4.4 of this manual.
error» message on the screen (fig. 32).
fig 32. "Communication error" message
fig 33. "Error 7" message
when there is no grain in measuring channel.
Troubleshooting
mode.
27/29
Advertisement
Table of Contents
