Table of Contents
Advertisement
General safety recommendations
General safety recommendations
The product is designed for industrial use. Installation and service must
be carried only out by trained and authorized personnel and according
to valid standards.
Before making any electrical connections, ensure that power supply
voltage and frequency meet the specifications provided on the labels of
devices and in this manual.
Incorrect connection may cause damage to the device. When installing,
always refer to relevant safety regulations.
Before carrying out any welding work near the device, make sure that
the device is disconnected from the power supply.
Do not use the device with damaged insulation of cables. In the case of
damage to the cable, disconnect the device from the power supply and
contact manufacturer or local dealer for cable replacement.
In case of device malfunction do not attempt to disassemble and repair
the device. Please, contact manufacturer or local dealer for repair.
Take precautions when mounting the equipment by using appropriate lift
gear, platforms and tools.
3/29
Advertisement
Table of Contents
