Summary of Contents for PCE Health and Fitness PCE-T 238
Page 1
User Manual PC Software PCE-T 238 Tachometer User manuals in various languages (deutsch, français, italiano, español, português, nederlands, türk, polski, русский, 中文) can be found by using our product search on: www.pce-instruments.com last change: 18 June 2019 v1.0...
Meaning of the individual icons on the toolbar ......... 4 Operation ....................5 The first use of the software ..................... 5 Connect to the PCE-T 238 ....................5 Disconnect from the PCE-T 238 ..................6 Numerical display ......................6 Statistical data ........................6 Graphic representation .....................
Operation Description of the user interface The main screen consists of several sections: Below the title bar, there is a tool bar with icons that can be selected by a mouse click. These icons are grouped according to their functions. Below this bar, there are two sections.
Page 5
The lower bar shows the statistical settings of the program that can be defined in the settings screen. The upper status bar shows the dynamic settings or data of the PCE-T 238 which are directly taken from the connected device. These include the selected unit.
Meaning of the individual icons on the toolbar Group "Connection" Connect to the PCE-T 238 Disconnect from the PCE-T 238 Group "Data" Start a measurement Export a series of measurements to a CSV file Load a series of measurements from a file...
Operation The first use of the software Before the "PCE-T 238" can work with the software, the assigned COM port must be set in the software once. It can be set via the “settings dialog” In addition to the connection data, further settings for the date and time format can be made here.
("Date", "Time", "Duration" and "Measurement value"). Note: These data come directly from the PCE-T 238. The time can therefore deviate from the PC time. Statistical data The statistics include the number of measured points, the smallest and largest measured value and the average value.
Graphic representation In the area for the graphic evaluation, the selected unit ("RPM", "m/min", "ft/min", "in/min") is shown on the y axis and the duration (in seconds) is shown on the x axis. Moving the mouse cursor to a point in the displayed line makes a small information window with the data of the currently selected measurement value pop up after a short time.
"Print" dialog. Performing the measurement If a connection to the PCE-T 238 is active, a new measurement can be started. After clicking on the corresponding icon in the toolbar ("Start a measurement"), a new dialog is displayed. With the help of this dialog, additional settings relevant for the upcoming measurement can be made.
Page 11
PCE Instruments contact information Germany France Spain PCE Deutschland GmbH PCE Instruments France EURL PCE Ibérica S.L. Im Langel 4 23, rue de Strasbourg Calle Mayor, 53 D-59872 Meschede 67250 Soultz-Sous-Forets 02500 Tobarra (Albacete) Deutschland France España Tel.: +49 (0) 2903 976 99 0 Téléphone: +33 (0) 972 3537 17 Tel.