Maintenance, Troubleshooting And Repairing Minor Types Of Damage - PCE Health and Fitness FG Series Operation Manual

17. Maintenance, troubleshooting and repairing minor types of damage

1. Keep the gauge clean.
2. When using the force gauge, make sure that no contamination gets between the
gauge plunger and the enclosure. Upon identifying any contamination, remove
it using a tool which does not conduct electricity.
3. Unauthorised persons may not perform any repairs.
4. Have the gauge repaired by your local servicing facility. A list of servicing
facilities is enclosed in the warranty.
Messages and faults:
Message/fault
The message RESETTING is
displayed for an extended
period of time.
Message:
AD range exceeded (+/-)
The values indicated by the
gauge diverge significantly
from correct values
Units displayed are different
from the selected units
OPERATION MANUAL
Cause
Resetting process
disturbed
Resetting process
disturbed
Gauge out of
adjustment
UNIT/CLEAR key
pressed by accident
Recommendation
Keep the gauge in motionless position
and press →T(0)←
Put the gauge in horizontal position and
turn it off and on using the ON/OFF key.
Contact a servicing facility to calibrate
the gauge
Press the UNIT/CLEAR key several times
to display the correct units
33