Safety notes Please read this manual carefully and completely before you use the device for the first time. The device may only be used by qualified personnel and repaired by PCE Instruments personnel. Damage or injuries caused by non-observance of the manual are excluded from our liability and not covered by our warranty.
Applications • For the measurement of surface gloss for printing ink, paint, baked lacquer, coating and wood • For the measurement of surface gloss for construction decoration materials such as: marble; granite; glass; chemically polished or pottery brick • For the measurement of surface gloss for plastic and plastic sheets •...
Operation instructions Press the button to start the device. The display will now show “Calibrate?” Place the device, with the measurement window into the calibration slot, in the case of the device and press the button again to confirm the calibration process. The device now calibrates automatically. Once calibrated, the display shows “calibrate ok”...
Setting the time If you wish to change the time displayed on the device, press the button when “set time” is highlighted inside the “SET/MENU” screen (refer to picture in point 7 Menu Instructions). The highlighted area (beginning with the year) now begins to count up, press the button again to confirm the desired value.
Page 7
PCE Instruments contact information Germany France Spain PCE Deutschland GmbH PCE Instruments France EURL PCE Ibérica S.L. Im Langel 4 23, rue de Strasbourg Calle Mayor, 53 D-59872 Meschede 67250 Soultz-Sous-Forets 02500 Tobarra (Albacete) Deutschland France España Tel.: +49 (0) 2903 976 99 0 Téléphone: +33 (0) 972 3537 17 Tel.