Checking Led Activity; Ethernet Connector Leds; Figure 22 Rj-45 Leds - Meru Networks AP100 Installation Manual

Checking LED Activity

Access point status LEDs are provided on the Ethernet connector and on the face of the AP200.

Ethernet Connector LEDs

After the AP200 is connected, the LEDs near the RJ-45 connector should light, as shown in
Figure 22: RJ-45 LEDs
The green LED on the left blinks if any Ethernet activity is taking place. If there is no Ethernet activity,
the LED is off. The LED on the right is solid yellow if an Ethernet link is present. If no Ethernet link
is present or connectivity is lost, the LED is off.
Link present
Ethernet activity
Checking LED Activity
Figure
Installing the AP200
22.
31