Table 8 Ap200 Led Descriptions; Table 9 Ap200-Controller Status Information - Meru Networks AP100 Installation Manual

Table 8: AP200 LED Descriptions
LED Function
RF 2 The status LED for Radio 2 is a follows:
off—no radio present
yellow—radio initializing
red—radio failure
solid green—radio OK
blinking green—radio activity
RF 1 The status LED for Radio 1 is a follows:
off—no radio present
yellow—radio initializing
red—radio failure
solid green—radio OK
blinking green—radio activity
Status AP-Controller operational status (see
Power green—presence of power
Table 9: AP200-Controller Status Information
State
Attempting to discover
Controller
Connected
Authenticated
Disconnected
Standalone
Interpretation
In the process of discovering the controller. The
AP is connected but not associated with the con-
troller. If the AP does not associate with the con-
troller after a period of time, verify that the
connection between the AP and the switch or the
switch and the controller is unbroken.
Normal operation without security.
Normal operation with security.
Access point was once connected to a controller
and configured by the controller, but can no
longer find that controller
Access point is operating in a standalone mode Purple blink
Checking LED Activity
Table 9
)
AP200 LED Cycle
Green/Red/Blue/Red
Blue/Blue/Blue/Red
Blue/Blue/Blue/Red, for
2 seconds.
Blue blink
Green/Purple/
Green/Purple
Installing the AP200
a
33