StarTech.com ARMPIVOTHD User Manual page 31

Single-monitor arm

Hide thumbs Also See for ARMPIVOTHD:

Table of Contents

To change the angle that the monitor is tilted at, use the

6 mm Hex Key to turn the screw in the side of the mount

counterclockwise. When the screw is loose, position the

monitor at the angle that works best for you. Use the 6 mm

Hex Key to turn the screw clockwise to tighten it. (Figure 14)

6 mm Hex

Key

Figure 14

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Table of Contents

Need help?

Do you have a question about the ARMPIVOTHD and is the answer not in the manual?

Armpivothdb