Landis+Gyr Gridstream IV Series User And Installation Manual page 85

Appendix B - Compliance
Cet appareillage numérique de la classe B répond à toutes les exigences de l'interférence canadienne
causant des règlements d'équipement. L'opération est sujette aux deux conditions suivantes: (1) ce
dispositif peut ne pas causer l'interférence nocive, et (2) ce dispositif doit accepter n'importe quelle
interférence reçue, y compris l'interférence qui peut causer l'opération peu désirée.
To reduce potential radio interference to other users, the antenna type and its gain should be so
chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for
successful communication.
This device has been designed to operate with the antennas listed below, and having a maximum
gain of 5.5 dBi. Antennas not included in this list or having a gain greater than 5.5 dBi are strictly
prohibited for use with this device. The required antenna impedance is 50 ohms.
Approved Antennas:
Landis+Gyr P/N 106119-000
Element
Electromagnetic Radiated
Emissions
Electromagnetic
Susceptibility
Surge Withstand
Capability
Electrostatic Discharge
Element
FCC Certified
Industry Canada
82
Table B-1. WAN Stats: EMI & Power/Control Susceptibility
Description
FCC Class B, Part 15.247
ANSI C12.1
ANSI C12.1
ANSI C12.1
Table B-2. WAN Stats: Agency Approvals
Description
Part 15.247
RSS 210
98-1031 Rev AA Series IV Concentrator U and I Guide
Landis+Gyr