Landis+Gyr Gridstream IV Series User And Installation Manual page 60

Landis+Gyr
image.bin file
locations
The following table lists all the options in the download program:
Switch
Mccad
Session
-s CIF file
Concentrator User and Installation Guide
Download
Application
Figure 6 - 5. Launch OTA download program
Table 6-1. Download Command Line Switches
Description
Mccad is the concentrator address <net>.<node> which
requires a firmware upgrade.
Example: utlICDownload -mccad 30000.1
[Args Reqd: 1 defaults: 0.0
Session is a number between 0 - 255. This is the session ID of
the download task for the concentrator. All operations for the
download have the same session number.
Example: utlICDownload -session 5
[Args Reqd: 1 defaults: 2
The code image file (CIF) of the new version to be
downloaded on the concentrator is usually present in the /
home/download/MCC_Cnctr/ directory. If the directory does
not exist, create one and place the image.bin file in that
directory. Verify that it is the correct version. Downloading an
older or incorrect version can cause loss of communication
with the concentrator.
Example: utlICDownload -s /home/download/MCCCTR/
image.bin
[Args Reqd: 1 defaults: 2
98-1031 Rev AA
Chapter 6 - Performing System Upgrades
Session
Concentrator
ID
ID
format: %lu]
format: %lu]
format: %s]
57