Landis+Gyr Gridstream IV Series User And Installation Manual page 67

Chapter 6 - Performing System Upgrades
E. Type q for Quit. Hyperterminal displays a message to let you know it is saving changes in
F. Type b to Boot the concentrator.
G. Type y for Yes to reset the system. Wait for the reset to complete. When Hyperterminal
2. Copy the rom.bin and image.bin files to your c:\ drive before starting the update Flash memory
process.
3. Update the rom.bin file.
A. Open a command prompt window, usually under Start | Programs | Accessories. Keep
64
memory.
Figure 6 - 12. Hyperterminal quit Diagnostics
restarts, it displays new IP address. Note the IP address; you will need it for subsequent
steps.
Hyperterminal open.
Try to position the c:\ prompt and Hyperterminal windows so that you can see
both of them at once.
98-1031 Rev AA Concentrator User and Installation Guide
Landis+Gyr