Password Setting; Maintenance Setting - Canon imageFORMULA DR-G2140 User Manual

Password Setting

If you click [Password Setting] on the left menu, the page below is
displayed.
Item Description
Current
Enter the current password.
Password
Set the administrator password (up to
32 characters) for the scanner. This
New Password password is used for authentication
when configuring settings by Web
browser.
New Password
Used to confirm the password.
(Confirmation)

Maintenance Setting

If you click [Maintenance Setting] on the left menu, the page below is
displayed.
On this page, you can restore the scanner's factory default settings
and update the firmware.
Default
Value
Item
None
Initialize
None
Version up
None
134
Description
Restore the scanner's factory default settings. If
you click [Initialize] and then [Yes] in the screen
that appears, the scanner's factory default settings
are restored, and the scanner restarts.
Update the scanner's firmware. Click [Version up],
and specify the firmware file in the screen that
appears.