Canon imageFORMULA DR-G2140 User Manual page 58

3
Click the [OK] button to close the settings screen.
4
Set the counter in the Count-Only Mode.
Hint
The document page count can be specified by using the count
obtained from the Count-Only mode or by pressing the
to enter a number.
5
Press the Start key.
Verification scanning starts.
Hint
If the specified count is not met or is exceeded when scanning is
finished, one of the following errors is displayed on the operation
panel. "Error Message" (See p. 169)
Resetting the counter
The number of counted documents can be reset in the Count-Only
Mode.
1
Press the Menu key on the operation panel.
User Mode is activated. "User Mode Operations" (See p. 61)
2
Press the ▲▼ keys to select [Count Clear], and press
[OK].
(See p. 57) Count-Only Mode is enabled.
If "Count Clear" is assigned to the Function key, press the
Function key to reset the counter.
keys
Function Key" (See p. 59)
3
Press the ▲▼ keys to select [Reset], and press [OK].
The counter is reset.
58
Hint
"Assigning a Function to the