Setting The Scanner Driver; Configuration And Functions Of The Scanner Driver - Canon imageFORMULA DR-G2140 User Manual

Setting the Scanner Driver

When you load the driver for the first time, the selected scanner and a
dialog for selecting the default paper size are displayed.
Hint
• These settings will apply when [Default] is clicked in the ISIS driver
dialog box.
• For the TWAIN driver, the default size will be set to A4 and this
cannot be modified.
To scan documents with an application such as CaptureOnTouch,
open the scanner driver and configure the scanning conditions and
other settings.
This section describes the configuration and functions of the scanner
driver.
Configuration and Functions of the
Scanner Driver
The scanner driver consists of the following tabs.
Hint
For details on the setting screen, see the Help of the scanner driver.
Click the [Help] button of the driver to display help related to the
corresponding tab or dialog box.
[Basic] tab
Configure basic scanning conditions such as the mode, page size,
resolution, and scanning side.
Click [Setting] button of [Page Size], to set the scan area and the
custom paper size registration and long mode.
Hint
Depending on the ISIS compatible application, the application may
have its own screen for setting scanning conditions. If the scanner
driver is opened in such an application, setting items related to the
functions provided by the scanner driver other than scanning
conditions will be displayed on the [Basic] tab.
107