Mdns Setting - Canon imageFORMULA DR-G2140 User Manual

Item Description
Set the IP address of the scanner. If
DHCP is enabled, the IP address
obtained from it will be applied.
IP Address The value must be four decimal
numbers separated by dots and
expressed in the [xxx.xxx.xxx.xxx]
format.
Set the subnet mask of the scanner. If
DHCP is enabled, it provides the
subnet mask. The value must be four
decimal numbers separated by dots
Subnet Mask and expressed in the [xxx.xxx.xxx.xxx]
format.
When set to [0.0.0.0], a subnet mask
appropriate for the IP address is
automatically used.
Set the IP address of the scanner
gateway.
If DHCP is enabled, it provides the
default gateway. The value must be
Default four decimal numbers separated by
Gateway dots and expressed in the
[xxx.xxx.xxx.xxx] format. Also, the
gateway needs to be running in the
same subnetwork as the scanner. If
[0.0.0.0] is set, this setting is disabled.
Default

mDNS Setting

Value
If you click [mDNS Setting] on the left menu, the page below is
displayed.
None
None
Item
None
mDNS
133
Description
Enable/disable multicast DNS.
This setting allows scanning
applications to search for and
automatically connect to the scanner.
This is normally enabled.
When the setting is disabled, you must
manually specify the scanner using its
assigned IP address to scan from the
scanning application.
Default
Value
ON