Password Setting; Maintenance Setting - Canon imageFORMULA DR-S150 User Manual

Item Description
Set an encrypted password using 8
to 16 characters. You can use
single-byte letters, numbers,
Encryption
hyphens, and underbars. An error
password
appears when you press the
[Apply] button if you input any
illegal characters.
Trap setting Select ON/OFF for trap setting.
To specify a host to be targeted for
trap setting, input its IP address or
Trap
computer name. You can specify a
destinations
maximum of 5. You can input up to
64 characters in each line.

Password Setting

If you click [Password Setting] on the left menu, the page below is
displayed.
Item Description
Current
Enter the current password.
Password
Default Value Item
New
Password
None
New
Password
ON (Confirmation)

Maintenance Setting

None
If you click [Maintenance Setting] on the left menu, the page below is
displayed.
On this page, you can restore the scanner's factory default settings
and update the firmware.
Item
Initialize
Default Value
None
83
Description
Set the administrator password (up
to 32 characters) for the scanner.
This password is used for
authentication when configuring
settings by Web browser.
Used to confirm the password.
Description
Restore the scanner's factory default settings. If
you click [Initialize] and then [Yes] in the screen
that appears, the scanner's factory default
settings are restored, and the scanner restarts.
Default Value
None
None