Setting Initialization - Canon imageFORMULA DR-C225W II Wi-Fi Connection Manual

Name
Key Index When using WEP encryption, set the
number of the WEP key that you wish to
use for encryption (1-4).
This setting must be the same as that of
the other devices (access point, etc.) you
wish to connect to.
WEP Key Set the encryption key (WEP key) that you
1 - 4 wish to use for WEP encryption.
Up to 4 WEP keys can be set. This setting
must be the same as that of the other
devices (access point, etc.) you wish to
connect to. A WEP key must be entered
using hexadecimal or alphanumeric
characters.
In most cases, alphanumeric characters
are used.Enter 5 characters if the key size
is 64 bit or 13 characters if the key size is
128 bit.
For hexadecimal, a value consists of
numbers (0-9) and English letters (A-F).
Enter a 10-digit value if the key size is 64
bit or a 26-digit value if the key size is 128
bit.
WEP Key Length
Hexadecimal 10 (digits)
characters
Alphanumeric 5 characters
WPA/WPA2 Configuration
This appears when [Authentication Method] is set to [WPA] or [WPA MIX].
For setting details, see "WPA/WPA2 Configuration" on p.28 in Access
Point Configuration.
Details Default Value
1
None
WEP Key Size
64bit 128bit
26 (digits)
characters
13 characters

Setting Initialization

This procedure returns the scanner's settings to their factory
defaults.
1
Click [Initialize] on the top page of the Wireless Connection Setup
Tool.
The confirmation screen appears.
2
Click the [Yes] button.
Settings revert to their factory default states.
3
Restart the scanner.
31