Maintenance - Canon imageFORMULA DR-G2140 User Manual

Maintenance

Select the following menu items to display various information about
the scanner and to conduct maintenance operations.
Total Scan
Shows the total number of scanned images recorded by the scanner.
Image Sensor LED On
Lights the image sensor LED to make dust easily visible.
the Sensors" (See p. 137)
Feed Cleaning Sheet
Sets the feeding mode for the cleaning sheet. After loading a
dedicated cleaning sheet, press the Start key to feed the cleaning
sheet and remove dust in the feed path.
Pick Roller Kit
Select this to replace the document feed rollers (pickup, feed, and
retard rollers) and display the number of feeds since the counter was
reset. Select [Reset] to reset the roller kit feed count.
Resetting the Page Counter" (See p. 142)
Cartridge Ink
The amount of remaining cartridge ink is displayed. This is displayed
only when the optional Imprinter is installed.
IMPORTANT
The amount of remaining cartridge ink displayed is an approximation
and may differ from the actual amount remaining.
Image Sensor On Time
Displays the total lighting time of the image sensor.
Feed Roller
Displays the total number of sheets fed by the feed roller.
Platen Roller
Displays the total number of sheets fed by the platen roller.
"Cleaning
Exit Roller
Displays the total number of sheets fed by the exit roller.
Separation Pad
Displays the total number of sheets fed by the separation pads.
Select [Reset] to reset the separation pad feed count.
Board On Time
Displays the power board total runtime.
Version
"Checking and
Displays the scanner version.
71