Scanning Shortcut - Canon imageFORMULA DR-G2140 User Manual

5
To check the scanned image, click the [Finish] button.
To edit scan images, see "Operations for the scanned image edit
window" on p. 91.
Click the button to edit the output settings.
"Setting the Output" (See p. 98)
Click the [Cancel] button to discard the scanned image and return
to the main window.
When the output has finished, a popup window will be displayed.
If saving the scanned image, a link to open the save destination
folder will be displayed.
This completes the Standard Scanning.
Hint
If you click [Open storage folder], the folder in which the saved
scanned images were saved opens. Depending on the output
settings, the [Open storage folder] link may not be displayed.

Scanning Shortcut

Operations;
Register shortcut  Scan documents  Image output
By registering favorite combinations of frequently used document
selections and output methods as scanning shortcuts, you can scan
just by clicking the Scanning Shortcut panel.
Hint
If a registered scanning shortcut is assigned as a job, you can run
shortcut scans using these settings by pressing the scanner start
button. "Scan by pressing the start button" (See p. 90)
83