Supplying Black Toner - Canon iR C6800 Series Installation Procedure

Chapter 1
4) Open the front cover.
5) Open the color toner supply cover [1].
F-1-108
6) Fit the Y toner cartridge [2] through the color toner
cartridge slot [1].
[2]
F-1-109
7) Turn the lock lever [1] clockwise to set the Y toner
cartridge [2] in place.
F-1-110
8) Close the color toner supply cover.
9) Close the front cover.
10) See that the control panel indicates the message
"Set the Toner Cartridge."
11) Repeat steps 4) through 9) to set the C toner
cartridge.
12) See that the control panel indicates the message
30
[1]
[1]
[2]
[1]
"Set the Toner Cartridge."
13) Repeat steps 4) through 9 to set the M toner
cartridge.
1.2.17
Supplying Black
Toner
iR C6800C / iR C6800CN / iR 5800C / iR 5800CN
1) Check to see that the warm-up period is over (i.e.,
Keep paper in the machine so that the control panel
will indicate the message "Ready to Copy").
2) Execute the following service mode item to supply
black toner: FUNCTION>INSTALL>TONER-S (10
min avr; 13 min max.).
While this service mode item is under way, a
countdown is made on the control panel; at the end,
'OK!' is indicated.
1.2.18
Cleaning
Intermediate
Belt
iR C6800C / iR C6800CN / iR 5800C / iR 5800CN
1) Execute the following service mode item to clean
the ITB: FUNCTION>CLEANING>TBLT-CLN
(about 20 seconds).
The notation "OK!" appears on the screen to
indicate the end of the service mode item.
1.2.19 Supplying Color
Toner
iR C6800C / iR C6800CN / iR 5800C / iR 5800CN
1) Execute the following service mode item to set up
color toner
FUNCTION>INSTALL>INSET-3
minutes).
0002-6727
the
Transfer
0002-6728
0002-6729
settings:
(about 14