Turning On The Main Power Switch - Canon iR C6800 Series Installation Procedure

the environment switch [1] (so that the drum heater
will go on regardless of the state of the main power
switch [2]).
[1]
ON
ON
[2]
F-1-97
At time of shipment from the factory, the
environment switch is off.
1.2.13 Turning On the
Main Power Switch
iR C6800C / iR C6800CN / iR 5800C / iR 5800CN
1. Be sure to remove all packing material from the
cassette before turning on the main power.
2. In the case of the 230-V model, take out the power
cord from the shipping box; then, connect its one end
to the machine and the other end to the power outlet.
3. The rotary starts to rotate when the main power is
tuned on. Do not use the door switch actuator.
1) In the case of the 100V model, connect the
grounding wire to ground the machine.
2) Connect the machine's power plug to the power
outlet, and turn on the main power [1].
3) Execute the following in service mode to disable
initial
COPIER>FUNCTION>INSTALL>AINR-OFF;
then, set it to '1'.
item after turning on the power to disable initial
rotation. If the power is turned off and then on, the
machine will start initial rotation, possibly causing an
error in its image stabilization mechanism.
F-1-98
0003-1015
1.2.14 Setting Up the Paper
iR C6800C / iR C6800CN / iR 5800C / iR 5800CN
1) Press the cassette release button, and slide out the
cassette to the front.
2) Check with the user to find out the type of paper to
use; then, check to see if the size configuration switch
[1] of the cassette is set to the desired paper type. If
not, set the cassette to suit the type.
Be sure to execute the foregoing service mode
[1]
Cassette
Chapter 1
rotation:
0002-6732
27