Canon iR C6800 Series Installation Procedure page 51

COPIER>FUNCTION>INSTALL>CARD).
2) Make the following selections in Additional
Function: system
settings>TCP/IP settings>IP address; then set up
the following: IP address, gateway address, subnet
mask.
Take care. If you fail to register [system control
group] and [system control ID No.], you will not be
able to perform 'register card to device' as part of
NSA setup work.
3) Under [system administrator info] of Additional
Function, enter any number for [system control
group] and [system control ID No.].
4) Turn off the control panel switch.
5) Turn off and then on the main power switch.
control settings>network
Chapter 1
43