Canon iR C6800 Series Installation Procedure page 28

Chapter 1
[1]
F-1-63
8) Route the high-voltage cable [1] of the black
developing assembly along the side of the toner
supply mouth [2].
[2]
F-1-64
9) Connect the connector [1] found at the inside front.
F-1-65
10) Fix the joint plate [1] in place using 2 binding
screws [2].
20
[2]
[1]
[1]
[2]
F-1-66
11) Remove the paper put between the photosensitive
drum and the developing rotary.
12) Fit the protrusion [1] of the included black
assembly locking plate into the positioning hole [2]
found at the rear of the machine.
[2]
[1]
F-1-67
13) Fix the black developing assembly locking plate
[1] in place using the included screw (binding; M4x8)
[2].
[1]
F-1-68
[1]
[2]