Schedules; Setting The Day/Night Schedule - heat-timer MPC Platinum Installation And Operation Manual

SCHEDULES

SELECT Settings/<Schedules>
• The MPC Platinum has two levels of heat. The Day Time level is for an occupied building
where people are active. The Night Time (Setback) level is for an unoccupied building or
when people are asleep.
• The MPC Platinum can have up to four Day periods and four Night periods for each day
of the week. The MPC Platinum will show which period number on the third line of the
display. See "Display Messages" on page 17.
• Every time the MPC Platinum updates the clock time, it checks the Day/Night program.
If there is a matching Day/Night time programmed, it sets the heat level accordingly;
otherwise, the heat level is not changed. This means there is no need to program every day
of the week.
• The first setting of each day, #1 Day, is important as it starts the Boost period. The Boost
quickly returns the building to the Day temperature from the lower Night temperatures. See
"Boost Mode" on page 26.
• The latest Night setting of each day is also important. The Early Shutdown uses this time to
calculate the Early Shutdown.
• Day and Night times do not need to be sequential. They can be in any order.
• If an office building is unoccupied all weekend, simply set the last programmed #4 setting
(8:00 PM on Friday). Then, set all the Saturday and Sunday programs to **:** (using the
DEL button). The control will stay in Night Time (Setback) until it reaches a Day setting
(6:00AM on Monday).

SETTING THE DAY/NIGHT SCHEDULE

Day/Night Schedules Mon #1 - 4
• The MPC Platinum has four Day and four Night settings for each day of the week. They
are designated as MON #1 Day Time, MON #1 Night Time, MON #2 Day Time, MON #2
Night Time, etc.
• The first time to be set will be MON #1. Adjust the Day and Night times as desired.
• Push the NEXT button to advanced to MON #2. If this is not programmed, the display will
show **:**. If you wish to set a time for MON #2, press the SELECT button to adjust.
Otherwise, continue to push the NEXT button to scroll through the rest of the Monday
schedules.
• To set or check the other days of the week, you must first enter the Schedule menu so
MON #1 is displayed. Then press the DAY button to advance to TUE #1, WED #1, etc.
• The MPC Platinum will ignore any schedule setting which is cleared. A cleared setting will
be displayed as **:**.
• Settings can only be cleared in Day/Night pairs. To clear just a Day or a Night setting, you
must clear both and then reprogram just the desired one.
• To clear the pair of settings, press the PREV (DEL) button.
Schedule Example
Schedule
MON
Day 6:00AM
#1
10:00PM ♦♦
Night
Day **:**
#2
Night **:**
Day **:**
#3
Night **:**
Day **:**
#4
Night **:**
♦ No boost will take effect.
♦♦ Early Shut Down ends. Night Schedule begins?
MPC Platinum Installation and Operation Manual
Default: 6:00Am (Day#1)/10:00Pm (Night#1)
TUE WED
6:00AM 6:00AM
10:00PM ♦♦ 10:00PM ♦♦
**:** **:**
**:** **:**
**:** **:**
**:** **:**
**:** **:**
**:** **:**
Day of the Week
THU FRI
6:00AM 7:00AM
10:00PM ♦♦
11:00AM
**:** **:**
**:** **:**
**:** 6:00PM
10:00PM ♦♦
**:**
**:** 1:00PM
**:** 4:00PM
----- SCHEDULES -----
Day/Night Schedule
Copy Schedule
Set Date/Time
Aux Schedule
ALERT
The MPC Platinum will ignore any
Time setting that reads **:**
The #1 Day setting for any Day
Time is used by the Boost The
last Night Time setting is used by
the Early Shutdown ESD features
No two settings can have the
same time on the same day
------ SCHEDULES ------
MON # 1
Day Time 6:00Am
Night Time 10:00Pm
Press DAY
------ SCHEDULES ------
TUE # 1
Day Time 6:00Am
Night Time 10:00Pm
Press NExT
------ SCHEDULES ------
TUE # 2
Day Time **:**
Night Time **:**
SAT SUN
**:** **:**
**:** **:**
8:00AM ♦
**:**
4:00PM ♦♦
**:**
**:** **:**
**:** **:**
**:** **:**
**:** **:**
29