Broadcom NetXtreme BCM57 Series User Manual page 77

Ethernet controller

Table of Contents

NetXtreme User Guide

13. If you want to create a VLAN on the team, select Add VLAN, or if you want to change the settings of an

existing VLAN, select Edit VLAN, then click Next. If you do not want to create or edit a VLAN, select Skip

Manage VLAN, then click Next, and continue with the wizard from the Finish screen (see

page 80

of this procedure).

VLANs enable you to add multiple virtual adapters that are on different subnets. The benefit of this is that

your system can have one network adapter that can belong to multiple subnets.

Note: VLANs can only be created when all team members are Broadcom adapters.

14. Type the VLAN name and then click Next.

Note: The team name cannot exceed 39 characters, cannot begin with spaces, and cannot contain

any of the following characters: & \ / : * ? < > |

Broadcom

April 2017 • 2CS57XX-CDUM514-R

Using Broadcom Advanced Control Suite 4

Step 18 on

Page 77

Table of Contents

Troubleshooting

Do you have a question about the NetXtreme BCM57 Series and is the answer not in the manual?